MONO FLANGE VALVE SINGLE BLOCK & BLEED

Bonnet Assembly
1.Screwed bonnet design.
2.Bonnet- back seated blow out proof.
3.Spindle — ground and thread rolled.
4.Packing below thread.
5.Spindle tip — non rotating tip shut off type — hardfaced.
6.Regulating — stellited and soft seated.
7.Bonnet Pusher — silver plated for anti galling freezing for increased stem cycle life.
8.Dust cap protects stem threads from externals contamination.
9.Leak tight seal with low operating torque.

Technical specifications
1.Size : 1/4", 1/2"
2.End Connection : NPT, BSPT, BSP & Socket Weld.
3.Working Pressure : 6000 psi (413 bar)
4.Temperature Rating : PTFE 450° f(232°c) Grafoil 700° f (371°c)
5.Material of Construction : SS 316, SS 304, Monel, C.S
6.Stem Packing : PTFE, Grafoil.
7.All valves are 100% factory tested prior to shipment.

MONO FLANGE VALVE DOUBLE BLOCK & BLEED

Bonnet Assembly
1.Screwed bonnet design.
2.Bonnet- back seated blow out proof.
3.Spindle — ground and thread rolled.
4.Packing below thread.
5.Spindle tip — non rotating tip shut off type — hardfaced,
6.Regulating — stellited and soft seated.
7.Bonnet Pusher — silver plated for anti galling freezing for increased stem cycle life.
8.Dust cap protects stem threads from externals contamination.
9.Leak tight seal with low operating torque.